Equipment & Application Areas
Find the Belzona system for your asset by where the problem is — each area links to the recommended products and how we apply them.
Wall Problem Areas
Chemical splash, atmospheric weathering, and masonry cracking are the dominant findings on industrial walls. Belzona's wall coatings address each: chemical-resistant linings for process rooms, masonry repair for cracked structural walls, and weatherproofing for exterior plant walls in coastal and chemical-exposure service.
18 products
Floor Problem Areas
Industrial floor work is constrained by the binding spec on the drawing: a static coefficient of friction (SCOF) for slip resistance, a chemical-compatibility list for splash service, and a recoat window that fits inside a weekend or summer shutdown. Belzona's floor family is specified against those numbers, not against generic claims.
31 products
Engines & Casings
Engine and machinery casing repair is scheduled around the equipment's rebuild cycle: a planned overhaul opens a finite window in which cracks are dressed, fastener bores rebuilt, and parting-line damage corrected before the unit goes back together. Belzona supplies cold-cure, machinable repair composites that fit inside that window.
5 products
Solids Handling Machinery
Abrasive wear on screw flights, conveyor troughs, slurry-pump volutes, and cyclone cones drives the maintenance scope on solids-handling equipment. Belzona's ceramic-filled epoxy and elastomeric polyurethane systems restore the original wear profile and apply a sacrificial surface that lines up with the next planned outage.
5 products
Heat Exchangers Tube Sheets
Tube sheet repair is constrained by three things at once: the dimensional tolerance at the tube-to-tube-sheet interface, the dielectric requirement to break the galvanic cell with the bundle, and the inspection interval that defines when the next outage is available. Belzona's tube sheet system is built around those three constraints.
2 products
Separators
Separator vessels see a difficult combination at every internal surface: hydrocarbon, water, sand, and dissolved gas in continuous contact. Erosion-corrosion at the inlet, sand-scour on the bottom head, and chemical pitting in produced-water service are the dominant findings. Belzona's immersion-grade and chemical-resistant systems are graded to the service.
7 products
Scrubber Units
Wet scrubber and FGD lining work is governed by the chemistry inside the unit and the temperature window: dilute sulfuric acid, sodium-bisulfite carryover, sulfite-to-sulfate cycling, and operating temperatures that defeat standard epoxy. Belzona's 4000-series and high-temperature immersion grades are selected to fit those constraints.
7 products
Chutes & Hoppers
Abrasive wear on chute floors, sliding-flow side walls, and hopper liners drives most of the maintenance scope on bulk-material handling assets. Belzona's ceramic-filled and elastomeric repair systems rebuild the lost wear plate profile and apply a sacrificial wear surface that is replaceable on the same outage cycle.
8 products
Tanks & Chemical Containment Areas
Tank and containment work is governed by the chemistry inside the tank and the regulatory line in the spec sheet: WRAS for potable water, NSF for drinking-water contact, immersion-rated chemical compatibility for process fluids. Belzona offers a graded family of linings to meet each constraint without changing applicators or surface prep approach.
52 products
Valves, Pipes & Fittings
Most valve, pipe, and fitting repairs have to fit inside a turnaround window or, more often, around a system that cannot be shut down at all. Belzona supplies cold-cure repair composites that rebuild flange faces, seal live leaks, and reinforce pipework while the line stays under pressure.
35 products
Pumps
Cavitation pitting on impellers, abrasive wear on volute liners, and corrosion of pump casings drive most pump downtime in industrial service. Belzona repair composites and coatings let plants restore lost wall thickness and add an erosion-resistant finish without removing the pump from foundation.
23 products
Process Vessels
Process-vessel work fits inside a planned inspection outage: the next API-510 or owner-defined inspection window sets the calendar, and the vessel comes off line for a short, documented scope. Belzona supplies the family of cold-cure linings and rebuild composites that complete inside that outage.
18 products
Pipelines
External wall loss from atmospheric corrosion, corrosion under insulation, and mechanical damage are the most common pipeline integrity findings. Belzona addresses each with a graded set of cold-cure systems: ISO 24817 / ASME PCC-2 composite wraps for structural reinforcement, immersion-grade epoxy coatings for corrosion barrier, and surface-tolerant pastes for live-leak intervention.
31 products
Roof Problem Areas
Industrial roof work fits inside a narrow weather window: in the Gulf South, that is the summer reroofing window between the spring rain and the fall storm season. Belzona's cold-applied roofing systems install without hot work, cure in the actual ambient temperature on the roof, and lay down a continuous waterproof film without seams.
12 products
Mechanical Power Transmission
Fretting wear on shaft sleeves, keyway ovality, spline backlash, and bearing-housing bore wear are the recurrent maintenance findings on mechanical power transmission components. Belzona's machinable repair composites rebuild the worn surface back to fit class without scrapping a long-lead-time shaft or housing.
5 products
Gaskets, Seals & Shims
Gasket, seal, and shim work is constrained by dimensional tolerance: the gasket has to seat in millimeters, the shim has to land at the correct thickness, and the seal has to hold the system pressure on a face that has not been milled in years. Belzona's form-in-place compounds are specified against those tolerances.
21 products
Fans, Blowers & Compressors
Leading-edge erosion on fan and blower blades, particulate wear in housings, and casing corrosion drive the maintenance scope on rotating air-moving equipment. Belzona's metal-rebuild and low-friction coating systems restore aerodynamic profile and recover the flow performance the asset has lost since the last overhaul.
8 products
Ships & Maritime Structures
Marine and maritime repair work is constrained by class society approvals, the splash-zone tide cycle, and the cost of dry-docking. Belzona's surface-tolerant and immersion-grade systems are selected to fit those constraints: applied to damp or oil-contaminated steel, cured at ambient temperature, and built around products with vessel-side approvals tied to specific product codes.
25 products
Heat Exchangers
Galvanic corrosion at dissimilar-metal joints, erosion at tube inlets, and chemical attack on water-side internals are the dominant failure modes on industrial heat exchangers. Belzona supplies a graded family of coatings and composites to rebuild lost wall thickness and electrically isolate the tube bundle from the water-box wall.
2 productsElectrical & Power Generation Equipment
Belzona repair composites and protective coatings for electrical and power-generation equipment — sealing transformer and oil leaks, protecting turbines and generators against corrosion and cavitation, and rebuilding worn casings and components.
6 productsHVAC & Refrigeration Equipment
Belzona solutions for HVAC and refrigeration equipment — protecting ductwork, chillers, and coils against corrosion and restoring metal loss to extend service life.
4 productsBuildings & Structural Steel
Belzona repair and protection systems for buildings and structural steel — weatherproofing exposed steelwork, repairing concrete cracks and sidewalks, sealing elevator pits, and protecting structures against corrosion and the elements.
6 productsWater & Wastewater Treatment Plant
Belzona coatings and linings for water and wastewater treatment plants — including potable-water linings, containment sealing, and corrosion protection for tanks, channels, and process equipment.
4 products